Futaba 4PK-2.4G SUPER Radio Set

If you are looking for high-end radio gear then this is it!!
Futaba 4PK-2.4Ghz has been upgraded to SUPER model!
Response has been improved by 50% and improve your driving availability.
Interface has been upgraded with New Multi-Function Switch.
Receiver has been also upgraded to R614FF, iImproved with further size reduction as well as weight reduction.
Mixing System has been also improved.

R614FF:
Size: 35.1 x 23.2 x 8.5mm
Weight: 7.8g

4PKS Specifications:

• Menu Selection and Direct Selection modes — the menu screen can be selected from among 4 levels, while the direct menu for up to 8 of your more frequently used functions can be assigned to direct selection buttons
• Brake mixing for large cars — allows front and rear wheels of 1/5 scale and larger cars to be adjusted independently
• Anti-skid braking system — applies the brakes in a way so that the tires do not lose their grip on the track, even when braking in the corners
• Throttle acceleration — reduces the time lag on the clutch and brakes
• Throttle speed — lets you accelerate smoothly on slippery road surfaces for more control with less tire spin
• Start function — pre-sets initial acceleration off the starting line at less than full throttle to reduce wheel spin; normal throttle resumes when the trigger is released
• Steering speed — suppresses the maximum operating speed of the steering servo for better control
• Racing timer — records up to 99 lap times, with total time and average lap time, and can be activated automatically with the trigger; an audible alarm can be set to indicate target lap and refueling times

4PKS System Overview:

• 2.4GHz FASST system — the industry's most reliable RF link
• 40-model memory — with names of up to 10 letters, numbers and symbols so that logical names may be used; model memory with different setups can be created using the model copy function
• Menu customizing — lets you display the menu order and other functions for individual models
• Digital trim w/reset — displays the current trim position on the LCD screen, while allowing for one step of operating amount to be adjusted with no effect on maximum travel of the steering and throttle servos
• Function select dial — assigns functions to the digital trim, grip dial and knob, and allows you to adjust the step amount and operating direction; eliminates trim positioning for each model because all dials are digital
• Function select switch — lets you assign functions to three switches and set operating direction
• MC-Link — sets the contents of the Link software for varying the frequency and other data changes of the Futaba speed control via your PC
• Edit button lock & trim/dial lock — prohibits the setting and operation of transmitter edit buttons, trim and dials
• Changeable wheel and trigger location — wheel position can be offset using the included APA adapter; wheel angle and trigger can also be adjusted
• Reversible hand operation — wheel section can be installed for left- or right-hand driving
• Tension adjustment — tension of the steering wheel and throttle trigger springs can be adjusted from the outside
• Mechanical ATL adjustment — lets you decrease the total travel of the brake side of the throttle trigger
• Display switch — allows function setup without transmitting
• Vibrating grip — can be used as a lap timer, up timer, navigation aid or low battery alert
• 7-color LED pilot lamp — select your favorite LED color

Description of all 36 4PKS functions:

1. EPA End point adjustment
2. STEXP Steering curve adjustment
3. STSPD Steering servo delay
4. THEXP Throttle curve adjustment
5. THSPD Throttle servo delay
6. A.B.S. Can be set up for the amount of brake return, Delay, Cycle Speed (pulse), Trigger Point, Cycle Duty Ratio, Steering Mixing
7. ACCEL Adjusts the rise characteristic from the throttle neutral position
8. START Throttle preset at start function/engine cut off by switch
9. BRAKE Front and rear independent brake control for 1/5GP car, etc.
10. IDLUP Idle up at engine start
11. TIMER Up, down, lap or lap navigation timer
12. LAP-L Lap timer data (lap time, average lap time) check
13. P-MIX (2) Programmable mixing between arbitrary channels
14. S-MIX 4WD mixing
15. BOAT Boat, etc. brake operation stop/outboard engine tilt mixing
16. SUBTR Servo center position fine adjustment
17. REV Servo operation reversing
18. F/S HRS, PCM model fail safe, battery fail safe (all channels)
19. M-SEL Model memory call
20. M-RES Model memory reset (ALL, DATE, MENU)
21. M-COP Model memory copy (SINGLE, GROUP) (MENU, SW/DIAL)
22. NAME Model memory name set/modify, username set/modify
23. DIAL Selection of functions operated by digital dial and digital trim
24. SWTCH Selection of functions operated by push switches
25. D/R Steering angle adjustment while running
26. ATL Brake side adjustment
27. CH3/4 Channel 3 & 4 servos operation position set/check
28. RXSYS Servo response mode and receiver type selection
29. MENU-T Function menu type selection
30. SYSTM Battery type/backlight/LCD contrast/buzzer/LED display color/initial screen display mode/power off forgotten alarm/2ND condition/2.4GHz band adjustment and setting
31. DTTRN Data copy from T4PK to another T4PK
32. SERVO Displays servo operation on a bar graph
33. MCLNK MC850C/601C/401CR Link software setting function
34. ADJST Steering wheel and throttle trigger correction
35. VIBRA Vibrator setting
36. THMOD Neutral brake and throttle servo forward side and brake side operation rate setting